News-Dynatronic Corporation Ltd.

"Tiangong I" hydrostatic test 2018-04-25

Project name:"Tiangong I" hydrostatic testBrief introduction: "Tiangong-1" is the first space test station designed by our country. After completing the testing tasks of multiple types of Shenzhou spacecraft, our unit's test system once again completed the watertight seal test of "Tiangong-1". We ha

Shenzhou VII spacecraft return capsule strength test 2018-04-25

Project name: Shenzhou VII spacecraft return capsule strength testBrief introduction: The return capsule of the Shenzhou VII spacecraft is an important carrier for the astronauts to return to Earth after completing their space mission. On the way back, the return capsule needs to withstand the weigh

A certain type of aircraft hydraulic piping installation stress test 2018-04-25

Project name: A certain type of aircraft hydraulic piping installation stress testBrief introduction: The test equipment of our company was used to test the installation stress of a certain type of aircraft's hydraulic pipeline to verify the rationality of the theoretical design.

Airplane Empennage vibration test 2018-04-25

Project name: Airplane Empennage vibration test Brief introduction: The aircraft's tail is an important part of the aircraft, directly determines the stability and reliability of the aircraft. With dynamic DAQ system, the 96 tail vibration test points simultaneously tested to verify the aircraft's t

Airplane Straight section strength test 2018-04-24

Project name: Airplane Straight section strength testBrief introduction: The strength parameters of aircraft cabin are an important indicator of aircraft performance. In order to get the parameter accurately and reliably, we arranged as many as 700 measuring points on the surface of the cabin and co

Monitoring of Pigging Process of West-East Gas Pipeline 2018-04-09

Our company utilizes dynamic signal test and analysis system, pull-wire displacement sensor and pressure sensor to give full play to Dynatronic-tech's advantage of being able to perform telemetry remotely through network communication to avoid personnel approaching dangerous test sites. After 39 hours of continuous monitoring, it is of practical significance. The data, real-time observation of pressure changes in the pigging process, and timely measures to ensure the safe and smooth completion of pigging. The entire process, long time, and complex environmental changes, the dynatronic-tech dynamic test system is in good working condition, and the collected data is real and reliable, which has been recognized by the China Petroleum Pipe Institute.

The DAQ system was used in the blasting test of the Three Gorges Cofferdam 2018-04-03

Dynatronic-tech dynamic signal test and analysis system, is designed for strength and life assessment test, especially for large-scale structure system. Capable of accurate measurement of of highly dynamic signals, Utilize USB3.0, DMA way to communicate with computer, real-time control, acquisition, storage, analysis.

Prestress test for hydraulic piping of military aircraft 2018-03-27

Modern large aircraft mainly have three power supply systems: Electric Energy, Pneumatic, hydraulic Hydraulics. The energy of the hydraulic system mainly comes from the drive shaft driven by the engine through the gearbox to drive the pump and increase the pressure inside the fluid. When an emergenc

Vertical Missile Launch Instantaneous Overload Acceleration Test 2018-03-23

High-precision, high-precision weapons such as missiles and other spacecrafts, They must have good maneuverability. The better the missile's maneuverability, the higher the overall structural strength of the missile. The stronger the maneuvering overload capacity, the higher the structural performance requirements of the engine. Before the production use, some parameters must be tested experimentally, so as to ensure that it can be safely used in high-altitude overload conditions. Therefore, the performance of the aircraft should be tested under the effect of overload acceleration so that the missile will not fail during the maneuver.

Application of data acquisition system in the Axis of expo 2018-03-22

Sun Valley of Expo Axis applies free-form design idea, which is reticulated shell structure with bolt connection joint.The expo axis is the main entrance and main shaft line of Shanghai world expo 2010 in China, with two floors above ground and half open architecture. The expo axis is one of the five permanent buildings of the expo. It is a large commercial and transportation complex integrating business, catering, entertainment and exhibition services.

Application of Strain Gauge Measurement in concrete deformation measurement 2018-03-20

Cement concrete shrinkage deformation research has always been an important and difficult in the field, but the basic deformation measurement technology is always unsatisfactory, become the key factors which restrict the development of the research and application. The current commonly used Strain Gauge Measurement in China are the outside micrometer and the comparator of dial gauge and dial gauge of dial gauge.

Data Acquisition Hardware Market Is Expected to Generate Huge Profits by 2027 2018-02-09

In a connected industrial environment evolving on the basis of advanced connectivity technologies, the accuracy and timeliness of input is highly crucial. While computerized systems have improved in terms of efficiency, they are only as efficient as the end sensors and the system collecting data from it. This is one of the primary reason for the demand of Data Acquisition Hardware among industries.

News